Title: The perfect combination of a flat handle and a regular handle: A practical and stylish solution for your door
When you are looking for the ideal solution for your door, combining a flat handle on the outside with a regular handle on the inside is a smart choice. This design not only offers functionality but also adds aesthetic value to your interior. In this article, we will explain step by step how to correctly install these handles and what to consider during the installation.
What do you need?
For installing the combination of a flat handle and a regular handle on the door, you will need the following materials:
All these parts are included in the following set.
GU sliding door hardware inside normal and outside flat handle with cylinder hole
-
External handle with 8 mm pin: This handle is attached to the outside of the door.
-
Reducer from 8 mm to 10 mm: This is an essential component that ensures the correct connection of the handle to the door.
-
Interior handle with integrated grip: The standard handle on the inside of the door, equipped with an integrated grip for easy use.
-
Confirmation screws M6x75
Step-by-step plan for installation
1: Place the Adapter bus in the Socket of the Lock.
The transition bus from 8mm to 10mm must be carefully placed in the crank hole of the lift lock. Follow these steps for a perfect fit:
-
Measure the thickness of the sliding door: Carefully measure the thickness of your door, as the transition sleeve must be adjusted to this size.
-
No adapter sleeve attached: saw or grind the adapter sleeve so that it exactly matches the thickness of the sliding door.
-
Place the adapter sleeve in the crank hole: Insert the modified adapter sleeve into the crank hole of the lifting lock, so that it is firmly and properly in place.
Make sure that the transition bus fits perfectly so that the locking mechanism can function smoothly and the handle is securely fastened.
2. The placement of the outer handle.
The outside handle has an 8 mm pin that needs to be adapted to 10 mm via an adapter sleeve. This adapter sleeve ensures that the handle is securely fastened and fits well on the door.
3. Inserting the pin into the latch.
The pin of the outer handle must be inserted through the square hole in the latch. This is a crucial moment, as the pin must fit properly into the locking mechanism for smooth operation. Make sure the pin is straight and can move freely through the lock.
4. Confirming the inner handle
Place the inner handle over the pin; if the pin is slightly long, it may be cut down. Once this is done, the 2 fastening screws can be inserted through the handle. By tightening the screws on the inside, the outer handle will be secured. Once this is done, the hex key can be tightened on the lever, which ensures that the pin stays in place. Finally, the cover cap can be placed over the inner handle.
5. Check the operation
"After both handles have been installed, test the operation of the lift lock and the handles. The outside handle should move smoothly without any resistance, and the inside handle should feel comfortable in the hand. Also check that the handles are securely attached and show no play."
Advantages of this combination
-
Aesthetically pleasing: The combination of a flat handle on the outside and a regular handle on the inside creates a stylish and uniform appearance.
-
User-friendly: The flat handle is ideal for outdoor use, as it has a sleek and modern look, while the regular handle on the inside provides a comfortable grip. This grip is often used when a sliding screen is placed on the outside.
-
Sustainable: The materials are designed for long-term use and provide both strength and functionality.
Maintenance Tips
-
Clean regularly: Make sure to clean the handles and the lock to prevent rust or wear.
-
Lubricate the lift lock: Apply a small amount of lubricant to the lift lock to keep it functioning smoothly.
By following these steps, you create a functional and stylish solution for your door that is both practical and visually appealing. Good luck with the installation!
